Sec. 25-23-60. Off-street parking area dimensions.

(a) All off-street parking facilities required by this article shall comply with the following dimensions:
Parking Lot Dimension Table

Dimensions in Feet
(19 Ft. Stall Depth)
A
B
C
D
E
F
G
STALL ANGLE DEGREES
STALL WIDTH
VEHICLE PROJECTION FOR 19T. STALL LENGTH
ONE WAY AISLE DEPTH
CURB LENGTH PER CAR
WIDTH FOR DOUBLE AISLE, WALL TO WALL
WIDTH FOR DOUBLE AISLE, OVERLAP CENTER TO OVERLAP CENTER
0
9
9
12
23
30
0
45
9
19.8
13
12.7
52.5
46.5
60
9
21
18
10.4
60
55.5
90
9
19
24*
9
62
0
* TWO WAY AISLE
8 X 16 Compact Space Typical


(b) The zoning administrator and the traffic engineer shall have the authority to establish and/or approve parking stall and maneuvering area dimensions for parking facilities other than those specified herein.
(c) When off-street parking facilities are located adjacent to a public alley, the width of said alley may be assumed to be a portion of the required maneuvering space.
(d) A walkway, if provided shall be in addition to the required parking and maneuvering space.
(e) Where off-street parking facilities are provided in excess of the amounts required, or when off-street parking facilities are provided, but not required by this article, said off-street parking facilities shall comply with the minimum requirements for parking and maneuvering space herein specified. (Amended during the March 2009 supplement.)