Create a Website Account - Manage notification subscriptions, save form progress and more.
There are various levels of resurfacing needs however history has shown that maintaining good roads in condition is significantly less expensive than waiting until they fail and completely rebuilding them. The purpose of sealing the roads is to protect against premature aging and extend the life of the asphalt. Think of it like sunblock for your roads! If you have further questions, please contact us.
Show All Answers
The primary function of any traffic signal is to assign the right-of-way at an intersection or crossing. The familiar red, yellow, and green lights allow pedestrians and conflicting streams of traffic to share the same intersection by means of time separation.
The City installs traffic signals in accordance with established State and Federal guidelines called warrants. City traffic staff review intersections using these warrants.
Similar to traffic signals, stop signs must meet warrants (guidelines) for installation. If you would like request that a study be performed to evaluate a location for a stop sign, please contact us.
The Traffic Engineering Division gets over 200 requests, suggestions, and complaints each year and investigates each one as quickly as possible. We value your input and appreciate your patience and understanding while we are resolving problems or answering your questions.
If you feel there is a lack of lighting on your residential street and would like to petition for additional street lights on your street, you may submit your request via email or by calling 530-661-5820.
If there is an obvious malfunction with an existing City traffic signal, please contact the City of Woodland Public Works Municipal Service Center at 530-661-5962 during normal business hours. Malfunctions include a signal that has been knocked over, a signal that is stuck in red phase, or not turning green for a particular direction, or a signal with lights out.
Please be prepared to provide the location of the signal (the intersecting streets), the direction in which it is affecting, and a description of the problem.
The City of Woodland typically will not place temporary stop signs at an intersection with inoperative traffic signals because it is the recommendation of the State and Federal guidelines to not post temporary signs. One of the major reasons for the guideline is that if the signal returns to power and is operating with a stop sign in place, it causes confusion for the drivers, and creates traffic conflicts.
Please visit our Neighborhood Traffic Management Program information page for more information.
In most cases, lowering the speed limit on certain streets will not slow traffic. The majority of motorists travel at a speed in which they feel is reasonable speed given the surroundings of the street, regardless of what the posted speed limit signs read. The basic speed law states that no person shall drive at a speed greater than is reasonable or prudent.
Therefore, the State of California has established the 85th percentile, or critical speed as the sensible speed. This is the speed at which 85% of the motorists are traveling at or below.
Stop signs are not a traffic calming method for speed reduction and in most cases will actually increase mid-block speeds as people speed to 'regain' time lost by stopping. Stop signs can only be posted in warranted locations. If you would like to request a stop sign please contact us.
The convenient street parking and several parking lots in downtown Woodland are close to Main Street and range from all day to hourly. See a map (PDF) that shows all of the public parking lots in the downtown area. For more information about parking in Woodland, please see the Downtown Parking Management Plans.
View an informational flyer on crosswalks (PDF).
The City ordinance reads that no foliage or structural features shall extend into the cross visibility area between three and one-half feet and seven feet above the surface of the public sidewalk area or shoulder. The intent of this restriction is to keep free a walkway without interference by or with vehicular travel.
No encroachment of any nature will be permitted or maintained which impedes, obstructs or denies such pedestrian or other lawful travel within the limits of the right-of-way or which impairs sight distance for safe pedestrian or vehicular traffic. Furthermore, the permitted or the owner of the adjacent property shall maintain the hedges, shrubs, walls, fences or similar structures erected for landscaping purposes in a neat and orderly condition at all times.
Please contact the City of Woodland Public Works Department at 530-661-5962.
With the passage of Measure E, the City set a goal of resurfacing every local street within the life of the sales tax measure. Currently we are on track to meet that goal by 2018 with the tax sunsets. If you would like information specific to your street or neighborhood please contact us.
Streets that are scheduled to be resurfaced generally need significant prep work provided first. In some cases, the amount of prep work is extensive and residents on occasion don't realize that it is only prep work. The final product however may be a slurry seal or cape seal applied one year following the prep work.
Please contact the City of Woodland Police Department at 530-661-7800.
If the pole is metal or concrete, please contact the City of Woodland Public Works Department at 530-661-5962. Please note the pole number indicated approximately 8 inches above the ground.
If the pole is wooden, please contact Pacific Gas and Electric Company at 800-743-5000.
Different styles of lights work at different color temperatures. Most of the white or blue looking lights are the newly installed LED light fixtures that were installed as an energy and money saving measure. The yellowish colored lights are typically high pressure sodium lights.
Most of the City's traffic signals have a way to detect vehicles and bicycles. Some locations have a loop of wire placed in the roadway that can determine when a vehicle or bicycle is present. Many newer signals have the bicycle detector symbol (small bike symbol) on the loop in the locations where a cyclist is most likely to be detected by a signal.
In a few locations where traffic loops are not feasible, the City has used video detection. The video detection system works by providing an image to a small computer that can detect a change in the image and determine the presence of a vehicle or bicycle.
Video detection can sometimes be compromised by the environment: fog, dust, shadows, trees, headlights and the reflection of the son on the asphalt can all have adverse effects on the accuracy of detection.